The
adjustable jaws allow you to re-chuck bowls for finishing the bottom or do
light clean-up work on the foot of the bowl. To mount the bowl, the bowl is
reversed and held by the rim, either internal or external, with 8 unique
soft PVC stoppers which are mounted on the face of the jaws.
11" and 15" jaws fit the
VM90 and VM100 Chucks
11", 15" and 19" jaws fit
the VM120 and VM140 Chucks
VM90 &
VM100
VM120
& VM140
Bowl Jaws
Part No.
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
11"
JB28590
3.75"
11"
JB285140
4 3/8"
11.25"
15"
JB38590
3.75"
14.75"
JB385140
4 3/8"
15"
19"
JB485140
4 3/8"
19"
Model
Description
Price
JB28590
VM90 / VM100 Bowl Jaw Set - 11"
$67.00
JB38590
VM90 / VM100 Bowl Jaw Set - 15"
$69.00
JB285140
VM120 / VM140 Bowl Jaw Set - 11"
$67.00
JB385140
VM120 / VM140 Bowl Jaw Set - 15"
$69.00
JB485140
VM120 / VM140 Bowl Jaw Set - 19"
$89.00
Above Prices do not include shipping
Pin Jaws
- 1 3/8"
Pin
Jaws, designed by well known American Woodturner and author Dick Sing, are
used for such items as kaleidoscopes and pepper grinders, etc.
1 3/8" long fit both
the VM90 and VM100 Chucks
VM90 & VM100
VM120 & VM140
Pin Jaws
Part No
Inner Diam
Outer Diam
1 /3/8"
J3590
5/16".
1 3/8"
Model
Description
Price
J3590
VM90 / VM100 1 3/8" Pin Jaws
$36.00
Prices do not include shipping
1" Jaws
These
jaws are used for expansion into small recesses and for firm holding of fine
spindle work, such as earrings, chess pieces, etc. They are ideal for
turning salt and pepper shakers. To turn very small articles, the jaws can
be unscrewed and only the backing jaws can be used.
1" long jaws fit the
VM90, VM100,
VM120 and VM140 Chucks
VM90 & VM100
VM120 & VM140
1" Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
J2590
5/16".
1"
J25140
5/16".
1"
Model
Description
Price
J2590
VM90 / VM100 1" Pin Jaws
$36.00
J25140
VM120 / VM140 1" Pin Jaws
$42.00
Prices do not include shipping
Shark
Jaws
Shark
jaws are so called because of their serrated inner and outer jaw surfaces.
These extended jaws provide an aggressive hold. They hold cylinder spigots
much more safely than standard jaws. They are much easier and faster than
traditional jaws used to turn long workpieces. Available in 1 3/8" and 1
3/4".
2" and 2 1/4"
long for the
VM90 and VM100 Chucks
2 1/8" and 2
5/8" long for the VM120 and VM140 Chucks
VM90 & VM100
VM120 & VM140
Shark Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
1 3/8"
JSP3590
1 1/2"
2"
JSP35140
1 1/2"
2 1/8"
1 3/4"
JSP4590
2"
2 1/4"
JSP45140
2"
2 5/8"
Model
Description
Price
JSP3590
VM90 / VM100 2" Shark Jaws
$36.00
JSP4590
VM90 / VM100 2 1/4" Shark Jaws
$36.00
JSP35140
VM120 / VM140 2 1/8" Shark Jaws
$42.00
JSP45140
VM120 / VM140 2 5/8" Shark Jaws
$42.00
Prices do not include
shipping
Long
Nose Jaws
These
jaws allow better access between the chuck body and the rear of the work
piece. They are also very practical when pre-turned work pieces or long work
pieces have to be refastened. For example, when remounting rough
turned work.
1 3/8" long for the VM90
and VM100 Chucks
2 7/8" long for the VM120
and VM140 Chucks
VM90 & VM100
VM120 & VM140
Long Nose Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
LNJ90
5/16"
1 3/8"
LNJ140
5/16"
1 7/8""
Model
Description
Price
LNJ90
VM90 / VM100 1 3/8" Long Nose Jaws
$36.00
LNJ140
VM120 / VM140 2 7/8" Long Nose Jaws
$42.00
Prices do not include
shipping
Multi-Purpose Jaws
By
removing one or more of the dovetail segments from these jaws, they are
adaptable to a variety of uses. The wide range of expansion and contraction
of the Uni-Chuck provides for unique adaptability when using these jaws.
5 7/8" for the VM90 and
VM100 Chucks
8 1/4" for the VM120 and
VM140 Chucks
VM90 & VM100
VM120 & VM140
Multi Purpose Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
MPJ90
3 /18" - 5 5/16"
3 5/8" - 5 7/8"
MPJ140
5 5/16" - 7 3/4"
5 7/8" - 8 1/4"
Model
Description
Price
MPJ90
VM90 / VM100 5 7/8" Multi-Purpose
Jaws
$65.00
MPJ140
VM120 / VM140 8 1/4" Multi-Purpose Jaws
$78.00
Prices do not include
shipping
Raffan
Step Jaws
Step
Jaws, designed by the famous Australian woodturner and author Richard
Raffan, are used for holding a range of spigot sizes with minimum jaw
movement and without the necessity to change the jaws. Boxes are easily
turned using the step jaws. The bottom can be turned by holding the rim
without leaving unsightly pressure marks.
4" for the VM90 and VM100
Chucks
5" for the VM120 and VM140
Chucks
VM90 & VM100
VM120 & VM140
Raffan Step Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
RMSJ90
2, 3 & 31/2"
4"
RMSJ140
2 1/8, 3, 4 & 4 1/2"
5"
Model
Description
Price
RMSJ90
VM90 / VM100
4" Raffan Step Jaws
$36.00
RMSJ140
VM120 / VM140 5"
Raffan Step Jaws
$42.00
Prices do not include shipping
Dovetail
Jaws
Dovetail
jaws are designed for mounting bowls by expanding into a recess or clamping
onto a spigot. The size indicated is the outside measurement of the jaw face
when fully closed. Dovetail jaws provide approximately 1 inch of expansion
beyond their specified size.
4" for the VM90 and VM100
Chucks
5" for the VM120 and VM140
Chucks
VM90 & VM100
VM120 & VM140
Dovetail Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
DJ90
3 1/2"
4"
DJ140
4 7/16"
5"
Model
Description
Price
DJ90
VM90 / VM100 4" Dovetail Jaws
$36.00
DJ140
VM120 / VM140 5" Dovetail Jaws
$42.00
Prices do not include shipping
Dovetail
Jaws - 2 3/4"
The 2
3/4" Dovetail Jaws were designed to accommodate work that vary between the
standard Dovetail Jaws that are supplied with the Chuck and 4" Dovetail
Jaws. Available only for VM90and VM100.
VM90 & VM100
VM120 & VM140
Dovetail Jaws
Part No
Inner Diam
Outer Diam
Part No
Inner Diam
Outer Diam
DJ7090
2"
2 3/4"
Model
Description
Price
DJ7090
VM90 / VM100 2 3/4"
Dovetail Jaws
$36.00
Prices do not include
shipping
Vacuum
Plate
This
device has been designed as an aid to woodturning. It enables an item
to be re- mounted on the lathe for finishing without risking further holding
marks. This device can be fitted directly into a Vicmarc chuck via the
standard jaws, or an optional SCI-120 scroll chuck insert can be used to
provide a means for mounting
directly onto the spindle. Select the appropriate SCI-120 insert for
your lathe's headstock spindle thread pattern below. (Insert not
included in price)
Model
Description
Price
VAC
12" Diameter Vacuum Plate
$95.00
Prices do not include
shipping
3 in 1
Screw Face Plate
This
screw chuck has three alternative diameters of 2", 3" and 4" to give optimum
support to any size of work. Made from K1045 medium tensile steel. Fitted
with the Glaser screw. Fits most lathes. Requires an SCI-120
scroll chuck insert with threading that fits your lathe's headstock spindle
thread pattern. Select the appropriate insert size below.
(Insert not included in price)
Model
Description
Price
SC3-1
3 in 1 Screw Face Plate
$89.00
Prices do not include
shipping
Screw
Face Plate
The
Screw Face Plate enables you to quickly remove the job from the Chuck and
remount if necessary. Dovetail pick up will fit any Vicmarc Chuck.
Model
Description
Price
SFP
Screw Face Plate
$25.00
Prices do not include
shipping
Faceplate Rings
These
can be used instead of the traditional faceplate. They facilitate remounting
of prepared blanks by mounting directly onto the chuck jaws. Also can be
used for turning green wood which will require returning later on. Fit
standard jaws supplied on chuck.
2 3/4" and 3 1/2" fit the
VM90 and VM100 Chucks
5" and 6" fit the VM120 and
VM140 Chucks
Model
Description
Price
FPR70
2 3/4" Face Plate Ring for the VM90 / VM100
$7.00
FPR90
3 1/2" Face Plate Ring for the VM90 / VM100
$10.00
FPR120
5" Face Plate Ring for the VM120 / VM140
$12.00
FPR140
6" Face Plate Ring for theVM120 / VM140
$15.00
Prices do not include
shipping
SCROLL CHUCK INSERTS
Model
Description
Choose Size
Price
SCI-90
VM90/100 Standard Right Hand Insert
$25.00
SCI-120
VM120/140 Standard Right Hand Insert
$25.00
LHI-90
VM90/100 Left Hand Insert
$30.00
LHI-120
VM120/140 Left Hand Insert
$30.00
CMI-1
Custom Made Inserts for unusual head stock thread patterns
.
. . . San Antonio, TX
